Broadcast One

Tues, June 20

  • London: 15:00
  • Paris: 16.00
  • NOTE: This is a 30-minute webinar

Looking for high-temperature, stress-strain, fatigue or creep data?

Join this webinar on Tuesday, June 20 to see how to access the new JAHM Curve Data module in CES Selector, providing access to materials curve data, including elevated temperature, true stress-strain, fatigue, and creep curves.

Register for this 30-minute, no-cost webinar to:

  • See a demonstration of the materials and data available in the JAHM Curve Data module
  • Find out how to access this widely-used and respected dataset as part of a comprehensive library of materials data
  • See a case study showing how the JAHM Curve Data module can be combined with CES Selector’s graphical analysis tools to select and compare material performance.

Comparison of strength and stiffness at 250°C

Comparison of strength and stiffness at 250°C
(click on image to view at larger scale)

Creep curves for Al 2024 (UNS A92024)

Creep curves for Al 2024 (UNS A92024)
(click on image to view at larger scale)


Further information

The JAHM Curve Data includes more than 2,900 materials, with a particular emphasis on metals and ceramics, and 24,000 sets of temperature-dependent data for elastic modulus, thermal expansion, thermal conductivity, S-N fatigue curves, stress-strain curves, and more. It contains a wider range of materials than many other databases, including data for:

  • organics, hydrocarbons and compounds (fuels, lubricants, air, gases)
  • performance of materials in different states (i.e., solid, liquid, gas)
  • materials used in fuel cells, batteries, electro-ceramics, semi-conductors, optics, thermal barrier coatings, etc.

This data enables users to compare and screen materials performance over a wide range of temperatures and access curve data for simulation.

Who should join the web seminar?

This session will be of particular interest to:

  • Materials specialists
  • Product/project/simulation engineers
  • Anyone selecting materials for high-temperature applications or looking for data to support CAE modelling.

About the presenters

Dr. Charlie Bream is the Senior Product Manager for CES Selector at Granta Design. After completing his PhD on recycling of thermoset composites at Brunel University, he spent 14 years in industry working on the development of lightweight materials and structures for British Aerospace (Space Systems), Pera International, and NXT before joining Granta in 2007.