Home > Education > CES EduPack > Teaching resources > Supplementary > Uni Queensland

University of Queensland Course in Materials Selection

For Professor Mike Ashby's CES EduPack lecture notes, see here >>>

The following have kindly been offered for sharing with other CES EduPack users by Carlos Caceres, Reader in Casting Technology at the University of Queensland.

Dr Caceres holds the copyright to these slidesets and is responsible for their content.

Profile of Dr Carlos Caceres and the Materials Selection course at UQ (PDF) >>>

If you would like to share your teaching materials in this way, please contact us.

Links are to PowerPoint files. These may launch within your browser on clicking. To download the file, right click and select "Save Target As...".

Intro	Course outline	Download (780KB)
Lecture 1	Materials Selection: Exploring the world of materials	Download (2MB)
Lecture 2	Understanding Material Selection Charts (1/2)	Download (2MB)
Lecture 3	Understanding Material Selection Charts (2/2)	Download (1.3MB)
Lecture 4	Materials Selection Without Shape (1/2)	Download (6.3MB)
Lecture 5	Materials Selection Without Shape (2/2): Case studies	Download (6MB)
Lecture 6	Shape factors (1/3)	Download (2.4MB)
Lecture 7	Shape factors (2/3)	Download (3MB)
Lecture 8	Shape factors (3/3)	Download (4.2 MB)
Lecture 9	Conflicting constraints	Download (1.6MB)
Lecture 10	Conflicting objectives	Download (2.2MB)
Lecture 11	Design of Composites / Hybrid Materials (1/2)	Download (3.2MB)
Lecture 12	Design of Composites / Hybrid Materials (2/2)	Download (3.8MB)